interfacial stress meaning in Chinese
界面应力
Examples
- Models for calculation of interfacial stress in cobalt - rich crusts breaking
破碎富钴结壳时界面应力计算模型 - Study of interfacial stress of single - fiber composite by photo - elastic experiment
单纤维界面强度光弹性实验和理论研究 - Stage ii begins at a peak associated with the maximal interfacial stress . then , the unloading of macro - stress occurs . in stage iii , the interface is completely separate
1 )随着界面开始分离，宏观刚度下降； 2 )界面应力达到最大值并发生卸载，使得宏观应力达到峰值然后卸载。 - The response of mmcs has a turning point , associated with the initiation of interfacial debonding , which is decided by the interfacial strength . unlike the two predecessors , the evolving complaint interface ( eci ) model allows unloading of interfacial stresses
在常响应界面情况下，复合材料横向拉伸应力?应变曲线存在明显的转折点，对应于界面分离的始发点，转折点的位置取决于界面粘结强度。 - Based on analysis and comparison of existing test data applied to existing ultimate strength prediction models , interfacial stress at the end of plate is deduced . after formulas for calculating the effective moment of inertia for frp - strengthened beams being revised and adjustment coefficient related to nominal main steel reinforcement ratio and curtailment length ratio being put forward , strength prediction formulas of compound beams under plate end debonding failure are established . in analysis of strength of compound beams under intermediate crack induced interfacial debonding failure mode , several bond strengths and their relation are introduced
对于板端剥离破坏，在总结现有承载力模型的基础上，利用已有试验数据对各承载力计算公式进行了分析比较，进一步采用分阶段分析法，推导了板端界面应力的计算公式，在此基础上，采用加固复合梁有效惯性矩的修正公式，建立了考虑名义配筋率和板端偏移比影响的板端剥离破坏梁承载力的计算公式；对于跨中受弯裂缝导致的粘结破坏，阐述了常见的几种粘结强度之间的区别和联系，并基于拉剪粘结强度，提出了跨中受弯裂缝导致粘结破坏的承载力计算公式，并利用现有试验结果确定了模型中的一些参数；最后，利用试验数据对本文建立的两种粘结破坏承载力计算公式进行了检验，结果基本吻合。